Do you want to buy a cooler but don’t know where to start?
Well, here’s our guide to choosing between the two!
There are plenty of coolers out there, but if you’re looking for something that’ll keep your drinks cold without breaking the bank then look no further than the Orion Coolers.
We compared the Orion Coolers against the Yeti.
In this comparison we found out that the Orion Coolers are cheaper, better quality, and come with a longer warranty.
So if you’re looking for a cheap cooler that won’t let you down, then check out the Orion Coolers.
If you’d rather spend a little bit more money, then the Yeti is definitely worth checking out.
A Brief Overview of Orion Coolers vs Yeti
Orion coolers are designed to provide superior cooling performance compared to other cooler brands. It comes with a powerful fan that circulates air around the interior of the cooler. This helps to maintain the temperature within the cooler. The fans are powered by a built-in rechargeable battery. The fan blades rotate at a rate of 1200 RPM. The motor is protected from overheating by a thermal fuse. The fan is controlled by a thermostat. The thermostat senses the ambient temperature and automatically adjusts the fan speed accordingly. The fan runs continuously until the temperature reaches the set point. Once the temperature drops below the set point, the fan stops running. The fan switches off after 30 minutes of non-use.
Ice Retention and Performance
The ice retention capacity of a cooler depends upon the surface area of the ice tray. The larger the surface area, the greater the capacity of the ice maker to retain ice. However, the larger the surface area, higher is the cost of manufacturing the ice trays. Hence, manufacturers usually opt for smaller surface areas to reduce costs.
Insulation
Insulation reduces the rate of heat transfer from the interior of the refrigerator to the exterior environment. It does not affect the rate of heat transfer between the interior and the exterior environments. In other words, insulation does not change the rate of heat flow within the refrigerator. Thermal conductivity
Yeti Design
Yeti Design is a company based in San Francisco, California. It was founded in 2004 by two friends who wanted to build a better coffee maker. Their goal was to create a product that would not only brew great tasting coffee but also be easy to use. They created the YETI Coffee Maker. This was the first coffee maker designed specifically for the home market. Today, Yeti Design offers many different products such as espresso machines, kettles, slow cookers, grills, blenders, juicers, and other appliances.
Orion Design
Orion Design is a manufacturer of commercial grade equipment. Orion Design is known for producing quality equipment that is built to last. Their products are used in restaurants, hotels, schools, hospitals, and other businesses around the world. References
Features
Rice has a large amount of starches. When you start to heating your rice cooker in an electric device, the heat inside machine starts to increase the temp and the water starts to bubble inside the container. When the boiled water mix with the starch in the grain, it starts to create foam and those bubbles expand beyond capacity of the cooker. This is the reason for rice cookers boils over.
Roto-Moulded Construction
Roto-moulded construction is a type of plastic moulding process where molten plastic resin is injected into a mold cavity under pressure. Rotomolding is used to produce parts that are hollow and thin walled. It is suitable for producing products such as toys, containers, and components for electrical equipment. Rotomolded parts are usually lighter weight and stronger than injection molded parts.
Bottle openers
A bottle opener is a tool designed to remove the cap from bottles of various sizes. Bottle openers are available in many shapes and sizes, but generally fall into two categories: lever-operated and twist-action. Lever-operated bottle openers typically have a handle attached to a long metal rod or lever that extends down into the neck of the bottle. Twist-action bottle openers have a short, flat blade that is inserted into the mouth of the bottle and twisted back and forth to pop off the cap.
Latches
A latch is a type of fastener used to hold two parts together. Latch mechanisms are usually found on doors, cabinets, drawers, and other movable closures. In addition to holding items closed, latches are sometimes used to lock objects such as boxes or suitcases. Latches are usually operated using a key, knob, lever, or button.
Handles
Handles are a type of hardware that allows people to move heavy loads easily. A handle is attached to something that needs to be moved, such as a door, cabinet, drawer, or box. Handles are typically made from metal, plastic, wood, or rubber.
Bear Resistance
Bear resistance handles are designed to prevent bears from getting into homes. These types of handles are usually found on doors, cabinets, drawers, and other items that are used by homeowners. Anti-theft Answer: Anti-theft handles are designed to help deter thieves from stealing items. These types of handles can be found on doors, cabinets and other items that are not meant to be taken by someone else.
The Lid
Lids are designed to protect the contents of the container from being damaged. Lids are typically placed on top of containers such as bowls, jars, and cans. Safety
Drainage Plug
Drainage plugs are used to prevent liquids from spilling out of the container. A drainage plug is usually found on the bottom of the container. It consists of a rubber stopper that fits into the opening of the container. This prevents any liquid from coming out of the container. Handle